Usually, it takes complex automation systems to control and monitor heating and ventilation systems or sub-assemblies thereof. The planning, installation and commissioning of these systems is not only time-consuming but also expensive. Digitalisation in building operation now makes it possible for the first time to perform these tasks directly and autonomously by an actuator: the Smart Actuator. Tested and ready-programmed applications on the Smart Actuator System support simple commissioning and remote access for monitoring and maintenance through cloud services.
Decentralised, autonomous control without a cabinet and automation station
Installation of applications from the SAUTER solution library for heating, ventilation and room automation
Easy, cost-reduced fitting thanks to the plug system
Commissioning using the smartphone app
Remote access to the application and operating settings via the SAUTER Cloud
Fast and cost-optimised wiring without terminals
Plug-in system with coloured and mechanical coding ensures error-free connection
Field devices are supplied with voltage directly via the Smart Actuator system
Optional I/O modules allow flexible system extensions for a wide range of applications
Commissioning and maintenance via cloud and smartphone app
2-way and 3-way ball valves are used in heating and cooling distribution systems, while 6-way ball valves prove to be ideal for single-room control with 4-pipe to 2-pipe terminal unit applications. Combined with the Smart Actuator, heat exchangers and heated/chilled ceilings can be controlled autonomously and energy-efficiently. Commissioning and remote access to the system can be done via Bluetooth LE, WLAN, or BACnet MS/TP.
Product documentationGlobe valves with a screw or flange connection enable the highest control quality for the energy-efficient operation of HVAC systems. Together with the Smart Actuator, applications can be operated without the use of additional controllers or automation stations. Various interfaces make commissioning and remote access to the system possible.
Product documentationDampers and volume flow controllers are used in ventilation systems to distribute the air required for air conditioning in buildings. In combination with a differential pressure sensor and a volume flow box, demand-led ventilation is provided in individual rooms. Rapid commissioning using a smartphone app via Bluetooth LE or SAUTER Cloud is just as possible as integration into building management systems via BACnet MS/TP.
Product documentationSmart Actuator Extensions
To operate comprehensive applications, signal exchange with the sensors and actuators are required. I/O modules extend the inputs and outputs of the Smart Actuator. Up to 2 I/O modules can be connected with a Smart Actuator, thus transmitting information from and supplying power for sensors and actuators.
Product documentationWiring Made Easy
In heating and ventilation installations, fast and error-free cabling is a decisive factor for the success of a project. All the cables required for power supply, bus connection, and connection cables for sensors, actuators, and I/O modules are designed as one connector system.
Integral Systems
Room control units measure the current temperature and enable the users to make adjustments. For applications in the area of individual room control, a room control unit can be operated directly on the Smart Actuator.
Please click the image of the Smart Actuator to open the 3D viewer.